Foshan Xendoll Intelligent Technology Co., Ltd.

Machine Center Milling/drillingC37

Add Date: 2023/12/1    Views: 687

1. All castings of the machine are made of high-grade HT250 cast iron, which are completely annealed to eliminate residual internal stress and keep deformation for a long time.
2. The guide rail is silver linear guide rail from Hiwin, Taiwan. It adopts full support design to ensure cutting stability, guide rail accuracy and mechanical life.
3, three axis C3 precision ball screw, after mid-cycle heat treatment and precision grinding, each axis is pre-drawn to reduce thermal deformation, high positioning and repetition accuracy.
4, all machines factory by Renishaw laser interferometer accurate detection, to ensure the three-axis precision backlash, ensure positioning accuracy.
5, three axes are servo driven, smooth transmission, high precision, large torque.
6. The three-axis track is covered with dustproof and anti-chip telescopic cover to protect the track and ball screw from wear caused by cutting water and residual material entering.
7, standard 218M machining center CNC system, optional Siemens 808D CNC system.
8, the main shaft is BT30, the transmission of cutting torque, 8 station tool library, can greatly improve the processing efficiency and precision of complex products.
9, spindle motor adopts 2.2KW servo spindle motor and drive, large power, spindle can be directional tool change can be rigid tapping.
10, 8 station tool library, knife change time is short, knife change action is safe and reliable.
11, electronic handwheel three gears adjustable greatly convenient operation and knife.
12, add balance weight block inside the column, the spindle runs smoothly up and down.
13. The fully enclosed sheet metal cover ensures the cleanliness and safety of the working area.
14, intermittent lubrication system, full protection structure and pneumatic broach system.
15, integrated water tank and pump system, program or manual control of processing coolant switch.
16, air pressure detection switch, when the pressure is lower than the rated pressure alarm, to ensure the safety of processing and tool change.
17, processing residue collection device, convenient and simple cleaning.
18. The whole machine has beautiful appearance and compact structure.

Processing range

X axis stroke

mm

300

Y axis stroke 

mm

175

Z axis stroke

mm

270

Max. drilling/milling capacity 

mm

13

Milling capacity cutter head(max.)

mm

16

Max. end milling capacity

mm

50

Spindle to table

mm

115-385

spindle to column

mm

235

Worktable

Worktable size

mm

450x160

T-slot (width*slot number*spacing)

mm

3-12-50

Spindle

Spindle drive mode

/

Unpowered spindle

Main axis speed

rpm

300-3500

Spindle power

kw

1.1

Spindle taper

/

MT#3

Feed drive

X, Y, Z axis rapid traverse speed

mm/min

6000

X, Y, Z axis torque

N.m


Positioning accuracy (X, Y, Z axis)

mm

0.03

Repeated positioning (X, Y, Z axis)

mm

0.02

Handwheel

Yes/No

Yes

Cooling system

Yes/No

Yes

CNC system

/

Xendoll

Air pressure

pa

0.55-0.6Mpa

Machine power

V/Hz

AC220V/50Hz

Gross weight/net weight

kg

300/350

Product size/dimension

mm

900x950x1750

Shipping size/dimension

mm

1100x1040x2000

News

Copyright © All Rights Reserved.   备案/许可证号: 粤ICP备20047778号-1
+86-757-28386038
+86-13928219122
eva.zhou@xendoll.com