Foshan Xendoll Intelligent Technology Co., Ltd.

Steps and methods for measuring coaxiality of CNC machine tools

Add Date: 2023/7/11    Views: 435

The coaxiality measurement of CNC machine tools is one of the important steps to ensure machining accuracy. The following will introduce the steps and methods for measuring coaxiality on CNC machine tools, to help you carry out accurate coaxiality measurement.
The following are the steps for measuring coaxiality on CNC machine tools:
1. Preparation work:
Before starting coaxiality measurement, ensure that the CNC machine tool is in a stable state. Remove debris from the work area and keep the machine tool stable. Prepare measuring tools, such as axial measuring instruments, measuring fixtures, etc.
2. Positioning measurement points:
Determine the axis position to be measured according to the measurement requirements. Use measuring tools to mark the corresponding positions for subsequent measurements.
3. Installation of measuring instruments:
Select a suitable coaxiality measurement instrument based on the position of the measurement point and the structure of the machine tool. Install the measuring instrument correctly at the measuring point and ensure its stability and reliability.
4. Conduct measurements:
Open the coaxiality measuring instrument and follow the instrument's instructions for measurement. The usual measurement method is to observe the reading on the pointer or display screen by rotating the machine tool spindle or workbench to obtain the value of coaxiality.
5. Record and analyze data:
During the measurement process, timely record the measurement data. After completing the measurement, analyze and compare the measurement results to evaluate the accuracy of coaxiality and the state of the machine tool.
6. Adjusting the machine tool:
Based on the measurement results, determine whether adjustments need to be made to the machine tool. If the coaxiality does not meet the requirements, the machine tool needs to be adjusted according to the specific situation to improve the coaxiality accuracy.
7. Re measurement and verification:
After adjusting the machine tool, re measure the coaxiality to verify the adjustment effect. After ensuring that the coaxiality meets the requirements, subsequent processing work can continue.
By following the above steps, you can accurately measure the coaxiality of CNC machine tools, helping to improve machining accuracy. Please note that during the measurement process, safety operating procedures should be strictly followed and operations should be carried out according to the specific instructions of the machine tool and measuring instruments.
The steps of measuring coaxiality on CNC machine tools include preparation work, positioning measurement points, installing measurement instruments, conducting measurements, recording and analyzing data, adjusting the machine tool, and re measuring and verifying. By using measuring instruments correctly and executing steps accurately, accurate coaxiality measurement results can be obtained, and machine tool adjustments can be made as needed to improve machining accuracy. Please ensure compliance with safety regulations during operation and make adjustments and optimizations based on actual situations.


Copyright © All Rights Reserved.   粤ICP备20047778号